kitchen appliance 7mm tempered glass 3 burner gas hob 2*120mm brass burner cap 4.2kW and square Pan Support built in gas cooker gas stove RDX-GH045

With the development of society and the improvement of science and technology, people have further requirements for the quality of life. As an important part of family kitchen life, gas stoves have become a hot spot in the kitchen electricity market. In addition to pursuing the experience of high fire, the safety of cooking utensils has also become a concern for consumers. Imagine when you are enjoying the fun of cooking, how much damage will be caused to users when the glass panel bursts suddenly, not to mention physical damage, even psychological problems may be triggered. At the same time, how much negative impact does it have on the brand and how much energy should be invested to make up for it.

1. For stove with iron fire cover, the fire cover has become rusty over a long period of time, and the rust spots have blocked the air outlet of the fire cover for a long time, resulting in the flame can not be burned out.
Solution: Clean the fire cover frequently. When cleaning the cooker, do not just wipe the panel. Deal with the dregs and rust spots in the flame distributor frequently.
2. The opening size of the cabinet top is larger than that of the cooker. Because it is too large, the place where the cooker is stressed is not the metal shell, but the glass panel. The long-term hanging force is easy to make the cooker panel burst.
Solution: Be sure to determine the size of the cooker first, and then open the hole of the cabinet. The hole will be as large as the cooker.
3. The user puts high-temperature objects directly on the panel, such as a newly used frying pan, a newly burned kettle, etc.
Solution: Remind the user to avoid putting hot things on the glass panel immediately.
4. The gas leaks from the cooker joint, gas pipe or other parts, and the leaked gas causes the cooker to burst due to local high temperature when burning.
Solution: regularly check the gas valve, regularly check the gas interface, regularly replace the pressure reducing valve of liquefied gas, and select the corrugated pipe with steel wire when installing.
5. The placement position of the flame splitter, also known as the fire cover, after cleaning is not consistent with the bottom, which causes the flame splitter to backfire for a long time or fire from the gap. This will not only cause the panel to burst, but also easily deform the flame distributor.
Solution: After cleaning the fire cover, it must be put back as it is, and there should be no gap between the fire cover and the seat.

From the above cause analysis and solution description, it can be seen that to avoid panel bursting from the root, users need to understand these common sense and carefully follow them in use. Usually, users don't know much or don't know much, which requires the guide to tell users the above details in detail at the last link of product sales, and the installation personnel will emphasize them when providing door-to-door service. In addition, when installing, do not save the cost of accessories blindly, and must choose high-quality pipes to avoid being penny wise and pound foolish.